Specifications:
Visor size:12.6in*4.3in/32*11cm
Esay to use:
Reduce glare and turn your vision into HIGH DEFINITION Reduces blinding glare from the sun during the da Brightens vision and cuts harsh headlight glare at night Enhances colors, clarity and contrast Your HD vision visor should not be cleaned with solvents (such as glass or surface cleaners) A mild solution of soap and water may be used, or the product may be ed gently with a soft, clean cloth Cleaners made for acrylic may be according to their instructions Quick and easy to install clips on to any car visor in seconds 1. Put the car's visor into the up position 2.Hold HD vision Visor with the open end of the clip facing you Note: the lenses should be facing in the down position 3. Slide the HD vision visor onto the back side of the visor (see image 2). The back side of the cars visor is the side closest to the car's windshield 4.Peel off the protective films from both side of each HD Visor lens Using the Daytime Lens Using the Daytime Lens to reduce the sun glare Flip the daytime lens into the down position (see image 3) Note: the yellow nighttime lens should still be in the up position when using the daytime lens. Using the Nighttime Lens Use the nighttime lens to cut glare from oncoming headlights and street lights Flip the daytime lens up and towards the windshield (see image 3) Flip the yellow nighttime lens into the down position Flip both lenses up against car's visor when not in use. Warning Image3 HD Vision Visor panels are not intended to replace the original visors with which your car was equipped Always wear your seat belt when driving
Audited Supplier 
){kind=link}